non-RFC-compliant?
Printed From: LogSat Software
Category: Spam Filter ISP
Forum Name: Spam Filter ISP Support
Forum Description: General support for Spam Filter ISP
URL: https://www.logsat.com/spamfilter/forums/forum_posts.asp?TID=5691
Printed Date: 04 November 2025 at 4:39am
Topic: non-RFC-compliant?
Posted By: Guests
Subject: non-RFC-compliant?
Date Posted: 29 June 2006 at 4:53am
|
Hello I have another question - during tests of my domain from http://www.dnsreport.com - http://www.dnsreport.com page I received an error: ERROR: I could not complete a connection to any of your mailservers! Of course site was trying to connect to Spam Filter. Is that correct? regards Seeb |
Replies:
Posted By: lyndonje
Date Posted: 29 June 2006 at 10:30am
|
Not sure, but I have noticed the same since using SF. Be interesting to know what the reason is. May be due dnsreport only doing some sort of 'quick' check, rather than emulating what an actual SMTP server would really do, and therefore the two get a different responses from SF which dnsreport interprets as a problem. |
Posted By: LogSat
Date Posted: 29 June 2006 at 4:31pm
|
SpamFilter is indeed forcefully terminating the connection from the remote server in some cases. This is not RFC compliant, as the RFC would like SpamFilter to simply output an error message to the remote server, allowing them to try again, and again and again... Until they get a correct recipient or a correct email. The RFC is quite old in some sections, and they really need to update it to consider "spam" in the equation, as it was of no concern several years ago. I do not believe we are going to follow the RFC strictly, and DNSReport has been advised that they should not consider those disconnect as "Errors" as they are by design. ------------- Roberto Franceschetti http://www.logsat.com" rel="nofollow - LogSat Software http://www.logsat.com/sfi-spam-filter.asp" rel="nofollow - Spam Filter ISP |
Posted By: Guests
Date Posted: 30 June 2006 at 3:09am
|
Thank you for explanation regards Seeb |
Posted By: Desperado
Date Posted: 03 July 2006 at 12:52am
|
Seeb,
In your "Allowedomains" list add:
[xxx.xxx.xxx.xxx]
where xxx.xxx.xxx.xxx is your mail server listen IP
In your BlockedToEmail list add:
mailto:*@xxx.xxx.xxx.xxx:null - *@[xxx.xxx.xxx.xxx]:null
where xxx.xxx.xxx.xxx is your mail server listen IP
DNSReport will then pass but you will not get any additional spam.
DnsReport uses the "Literal" address form to test your mail server and this makes SpamFilter accept the literal but then null it. ------------- The Desperado Dan Seligmann. Work: http://www.mags.net Personal: http://www.desperado.com |
Posted By: Guests
Date Posted: 03 July 2006 at 8:45am
|
Thanks Desperado, I do not need to see DnsReport test pass. I just noticed it reports such thing and wanted to ask if is that intended in SpamFilter and I got my answer ;) regards Seeb |
Posted By: cwbrandsdal
Date Posted: 18 June 2008 at 6:16am
We use the latest version of SpamFilter ISP, but can not find these lists.. Can anyone help uss on how to do this? We would like to have a clean dnsreport hehe Thanks, Christopher |
Desperado wrote:Posted By: LogSat
Date Posted: 18 June 2008 at 6:46am
|
If you're using SpamFilter Enterprise, you can follow the screenshot at:
http://www.logsat.com/sfi-spam-filter-screenshots/sfi-more-filtering-options.asp and add the domain: [xxx.xxx.xxx.xxx] in the list of domains. If you're using SpamFilter ISP, in the screenshot above, the list of domains in the upper left corner of the window will not be there, while instead you will see a tab labeled "Local Domains". That is the list Desperafo refers to, where the domain [xxx.xxx.xxx.xxx] should be added. For the "BlockedToEmail" list Desperado refers to, that is actually the tab labeled "TO Email" in the Blacklist group of tabs, and that is where you should add *@[xxx.xxx.xxx.xxx]:null ------------- Roberto Franceschetti http://www.logsat.com" rel="nofollow - LogSat Software http://www.logsat.com/sfi-spam-filter.asp" rel="nofollow - Spam Filter ISP |
Posted By: cwbrandsdal
Date Posted: 18 June 2008 at 7:29am
|
Thanks! That worked, but now I get a more serious error. Is there any way to stop this?: WARNING: One or more of your mailservers appears to be an open relay. If so, this means that you are allowing spammers to freely use the mailserver to send out spam! It is possible that your mailserver accepts all E-mail and later bounces it, or accepts the relay attempt and then deletes the E-mail, but this is not common. WARNING: xxxx.xxxxxxx.no appears to be an open relay: 250
Not.abuse.see.www.DNSreport.com.from.IP.xxx.xxx.xxx.xxx@DNSreport.com
Address Okay
<br /> |
Posted By: cwbrandsdal
Date Posted: 19 June 2008 at 3:30am
|
I finally figured it out! I had to remove :null from *@[xxx.xxx.xxx.xxx]:null. Somehow DnsReport got a 250 respons back when the mail was sent to null. What is prefered when we add to the blacklist? should we use :null or not? I would like to send as little respons as possible back to the sender lol. Thanks! |