LogSat Software

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I am moving my SpamFilter version 4.0.0.772 from one server to another.  In setting up the new server I was configuring the server and came across a couple of item of interest.

1.  On the old server (version 4.0.0.772)  there is a tab called "Custom Domain Filters" that has my domain listed in it along with all of the filters checked.  On the new install I am not seeing that.  On both server the local domain information is filled out.  Each is running the standalone version.
2.  Tried to run some test emails through the filter to prepare for the mobe the emails came through okay, but on the Acitivty Screen I am not seeing those being logged.

Any ideas?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ssullivan Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 February 2006 Location: United States Status: Offline Points: 9	Post Options Post Reply Quote ssullivan Report Post Thanks(0) Quote Reply Topic: Moving SF Server Posted: 20 May 2008 at 5:17pm
	I am moving my SpamFilter version 4.0.0.772 from one server to another. In setting up the new server I was configuring the server and came across a couple of item of interest. 1. On the old server (version 4.0.0.772) there is a tab called "Custom Domain Filters" that has my domain listed in it along with all of the filters checked. On the new install I am not seeing that. On both server the local domain information is filled out. Each is running the standalone version. 2. Tried to run some test emails through the filter to prepare for the mobe the emails came through okay, but on the Acitivty Screen I am not seeing those being logged. Any ideas?

LogSat Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 25 January 2005 Location: United States Status: Offline Points: 4104	Post Options Post Reply Quote LogSat Report Post Thanks(0) Quote Reply Posted: 20 May 2008 at 11:24pm
	ssullivan, That tab should be present in SpamFilter ISP "standard", but not in the "Enterprise" mode. Can you please confirm that you are running SpamFilter in "standard" mode on both servers? For the missing activity on the new server, can you please check under the "Settings - Configuration" tab, to see if you have an incorrect IP/port in the "SMTP listener socket" leftover from the old configuration? If they are either blank or correct, do you by any chance have another SMTP application that could be listening on that IP/port? Please note that some antivirus products will scan emails as well, and to do this they setup a small SMTP server/proxy on port 25, preventing SpamFilter to binding on port 25. To verify which software is listening on port 25 of an IP for example (aa.bb.cc.dd), simply open a MSDOS prompt and type "telnet aa.bb.cc.dd 25". The welcome banner you receive should provide a clue as to what product is using that port.
	Roberto Franceschetti LogSat Software Spam Filter ISP

LogSat Software

Site Navigation[Skip]

Spam Filter ISP Support Forum

Moving SF Server