LogSat Software

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have been working on getting iphones to be able to use outgoing SMTP Auth to our SF implementation. I have found (using debug monitor) that  if I have greylisting enabled the iphone is disconnected  and the user is never given the option to authenticate and bypass the greylisting. 

Since I want greylisting enabled, it appears that I have to setup a second instance of SF, on the same host,  to just handle SMTP Auth. I have installed the second instance listening on a different port and the users can authenticate & send mail. However what I can not seem to figure out, is how to setup the 2nd instance to run as a service like the primary instance does. Is this possible on the same host? & if so how do I do it.

Ideally, if a user connected and was authenticated they would bypass greylisiting. This would make it so I would not have to setup a second instance. Is it possible to setup this configuration?

Thank you for your help on this,
Stuart

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
BigRedN Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 November 2005 Location: United States Status: Offline Points: 9	Post Options Post Reply Quote BigRedN Report Post Thanks(0) Quote Reply Topic: How to setup multiple instances of SF as service Posted: 15 November 2009 at 1:23pm
	I have been working on getting iphones to be able to use outgoing SMTP Auth to our SF implementation. I have found (using debug monitor) that if I have greylisting enabled the iphone is disconnected and the user is never given the option to authenticate and bypass the greylisting. Since I want greylisting enabled, it appears that I have to setup a second instance of SF, on the same host, to just handle SMTP Auth. I have installed the second instance listening on a different port and the users can authenticate & send mail. However what I can not seem to figure out, is how to setup the 2nd instance to run as a service like the primary instance does. Is this possible on the same host? & if so how do I do it. Ideally, if a user connected and was authenticated they would bypass greylisiting. This would make it so I would not have to setup a second instance. Is it possible to setup this configuration? Thank you for your help on this, Stuart

LogSat Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 25 January 2005 Location: United States Status: Offline Points: 4104	Post Options Post Reply Quote LogSat Report Post Thanks(0) Quote Reply Posted: 16 November 2009 at 11:03pm
	Stuart, Greylisting occurs before the sender has a chance to send the authentication request, so it not going to be possible to allow SMTP Auth to bypass the greylisting process. If you know the IP ranges used by the iPhone user you can manually exclude subnets from being tested for greylisting, but that may not be a practical solution for all iPhone users. It is possible to install multiple instances of SpamFilter on the same server. First of all, you'll need a separate SpamFilter directory for each instance of SpamFilter you want to run. SpamFilter installs very cleanly, so besides a full install, you could also make a copy of your primary /Program Files/SpamFilter directory and paste it as a separate name, for ex. "/Program Files/SpamFilter2". You will need to modify the new SpamFilter.ini file (and if using SpamFilter ISP "standard" the \SpamFilter\Domains\SFI\Filters.ini file) to adjust the various entries that have pathnames to reflect the new folder for your new installation. You can then run SpamFilter from that second directory concurrently to your primary SpamFilter in the 1st directory.You only need to make sure that the listening IP:port combination is different between the different instances, as SpamFilter cannot listen on a socket (IP/port combination) that is used by a different application. So you should either manually edit the SpamFilter.ini file to change the listening IP, or run one copy of SpamFilter at a time while you change the settings. If you wish to install additional SpamFilter services, after following the above steps to copy the SpamFilter directories, you can use the INSTSRV.EXE utility from the NT Resource Kits: instsrv SpamFilter2 "C:\Program Files\SpamFilter2\SpamFilterSvc.exe" This creates the new service SpamFIlter2. You will then need to go to edit the Windows registry to modify the startup line: Go to HKLM\SYSTEM\CurrentControlSet\Services\SpamFilter2 and edit the ImagePath key Add the following startup parameter at the end of it /startedbyscm:F9D641D8-40E26D57-SpamFilter So the entry will look something like this: C:\Program Files\SpamFilter2\SpamFilterSvc.exe /startedbyscm:F9D641D8-40E26D57-SpamFilter You will now have 2 independent SpamFilter services. You can create as many as you wish... Please let us know if there are any more questions!
	Roberto Franceschetti LogSat Software Spam Filter ISP

BigRedN Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 November 2005 Location: United States Status: Offline Points: 9	Post Options Post Reply Quote BigRedN Report Post Thanks(0) Quote Reply Posted: 19 November 2009 at 10:21pm
	Hi Roberto, The instructions worked very well, I have had the service up and running for the last couple of days with no issues and happy users. I also setup the SSL for the user auth and I have to say your SSL instructions really made it straightforward. Thank you for your help and great documentation! Stuart

LogSat Software

Site Navigation[Skip]

Spam Filter ISP Support Forum

How to setup multiple instances of SF as service