Error message on startup. Right now I'm attempting to start / test as a non-service. I have checked my SMTP configuration, and even removed the stopped smtp virtual server that had been defined at the spare IP that I'm converting to SpamFilter. My configuration is specific with respect to binding  the Exchange server SMTP virtual server to the main NIC on 10.2.0.3:25. My SpamFilter configuration specifies 10.2.3.1:25 as the listen address/port, and 10.2.0.3:25 as the destination. I am running v.122 on w2K Server. Suggestions as to what else I should look at to identify the cause?

Tx,

Robert

Thanks Roberto. Telnet from another host, as well as from the console of the host in question, gets no response. On the host itself, the program terminates almost immediately - i.e. doesn't seem like it's hanging around to time out. As I rarely use telnet, I don't know if this is normal. In any event, there's no error message associated with the return. so I am concluding that there's no responsive service running on the ip:port.

I have rebooted a number of times in the course of testing this server. I've also shut down IIS completely. Also shut down NNTP virtual server, although that's obviously on a different port - indeed was specific to a different IP/NIC as well, but I'm trying to turn off any unnecessary "stuff" that might possibly create a conflict.

Is there any other way under 2K to see what processes are bound to ip:port?

Tx,

Robert

Thanks. I got SpamFilter working by binding to 10.2.0.3:26 instead of 10.2.3.1:25. I suspect Exchange is the culpret, although I'll need to verify that with the software to which you referred me. In any event, my firewall now routes to :26, and SpamFilter passes accepted email to :25. Everyone seems to be happy - me, the admin, probably most of all!

Do you know of any 3d party software that manages relay by whitelist / blacklist, or that provides authenticated smtp for relay? I have a situation where I must provide relay for overseas users. Exchange auth smtp doesn't seem to work with non-MS firewalls (Raptor 7 in my case). I know this is not what you're here to support, so simply asking in the hope that you may have run across something.

Thanks!

Robert